Easy way to install pvc ceiling and ceiling light

  1. First, punch holes on the ceiling and the wall. The distance between the holes is determined by the size of the room. This hole is used to hang expansion screws. The position of this hole is very important and is used to carry the weight of the overall ceiling.
  2.  
  1. After drilling the hole on the top of the wall, knock in and fix the three-piece expansion screw. Expansion screws are used to hang the keel, and it should be set in three sets before installing the roof in advance. When the holes on the top wall are completed, use a hammer to drive the expansion screws into the holes on the top wall.
  1. After the expansion screw set is installed, fix the keel on it. The keel is divided into the main keel and the auxiliary keel. The two keels should be connected with a hanging piece, and then hung on the three-piece set of expansion screws. After the keel is hung up, the distance between the keels should be adjusted. Generally, this distance is the distance of the gusset you want to install.
  1. After the installation of the keel is completed, start to install the edge trim. The installation of the edge trim is relatively simple. You can put a small wooden block on the hole on the wall, and hang the edge trim. If the wall is not perforated, you can directly fix the edge trim with glass glue, but this will not be firm.
  1. After the installation of the keel is completed, start to install the edge trim. The installation of the edge trim is relatively simple. You can put a small wooden block on the hole on the wall, and hang the edge trim. If the wall is not perforated, you can directly fix the edge trim with glass glue, but this will not be firm.
  1. After the entire surface of the gusset is installed, check if the bottom is flat. If the gusset is not installed well, one surface is easy to be uneven, so you must check it, otherwise the top seen below is crooked or slanted, then reinstall it, which will be more troublesome.
  1. If there is no problem in the inspection, insert the required electrical installation. For general electrical installations, the basis is to fix the electrical mainframe on the keel, then fix it with the matching screws, and finally put the electrical panel and the gusset panel flat. The most important thing about electrical installation is that the electrician must reserve a good line.
  1. Finally, after the electrical installation is completed, the test machine is no problem, and the overall roof is installed.The installation process of the ceiling is like this. The biggest difference between our own installation and the master installation is that the installation master is more professional and the flatness will be better. If you want to install it yourself, follow my procedure, pay attention to the details, and you can install it as well.